Manogauge shock-resistant pressure gauge - axial model ZX-03-A. Range 0–270 psi. Accuracy ±2.5%. Steel / SS. Connection G/PT/NPT 1/4". 2 configurations available. ISO 9001 / CE / KS certified.
| Pressure Range | 0–270 psi |
| Dial Size | Ø40–100mm |
| Material | Steel / SS |
| Accuracy | ±2.5% |
| Connection | G/PT/NPT 1/4" |
| Filling | Silicone |
| Configurations | 2 variants |
| Fill fluid | Silicone oil (dimethyl silicone, viscosity ≈ 100 cSt) |
| Shock rating | Mechanical shock: 50 g, 11 ms half-sine (IEC 60068-2-27) |
| Vibration rating | 5–500 Hz, 4 g rms (IEC 60068-2-6) |
| Media temp. range | −40 °C to +150 °C (silicone oil remains fluid) |
| Pressure range (PSI) | 0–30, 0–60, 0–100, 0–160, 0–200, 0–270 psi |
ZX-03 vs shock-resistant liquid-filled gauges across market tiers
| Feature | Manogauge ZX-03 | European Tier-1 | American Tier-1 | Generic (unbranded) |
|---|---|---|---|---|
| Price range (USD) | $10–22 | $30–60 | $35–70 | $4–10 |
| Accuracy class | Class 2.5 | Class 2.5 | Class 2.5 | Class 2.5 |
| Shock rating | 50 g / 11 ms (IEC 60068-2-27) | 50 g typical | 50 g typical | Varies by supplier |
| Fill fluid | Silicone oil (−40 °C) | Glycerine or silicone | Glycerine or silicone | Glycerine (quality varies) |
| Scale units | PSI standard; bar/MPa opt. | bar/MPa standard | PSI standard | PSI or bar |
| Lead time | 5–10 business days | 3–6 weeks | 3–6 weeks | 3–7 days |
| Minimum order | No MOQ | No MOQ | No MOQ | 50–100 units typical |
| Custom dial | Yes — no tooling fee | Available, setup fee | Available, setup fee | Limited options |
| IP rating | IP65 hermetic std. | IP65 typical | IP65 typical | IP54 typical |
Silicone oil (dimethyl silicone) remains fluid from −40 °C to +150 °C — far wider than glycerine's −20 °C to +60 °C window. In outdoor mobile equipment that cold-soaks overnight, glycerine can solidify and cause sluggish or inaccurate readings at start-up. Silicone oil also doesn't absorb water, preventing freeze-thaw cycling damage.
ZX-03 is designed to IEC 60068-2-27 (50 g, 11 ms mechanical shock) and IEC 60068-2-6 (4 g rms, 5–500 Hz vibration). This covers most mobile equipment duty cycles. For continuous 10 g+ vibration, contact us for the reinforced-movement variant.
Yes. PSI is standard (0–270 psi). Metric ranges (0–20 bar, 0–2 MPa) are available. Dual-scale dials (psi+bar, psi+kPa) are available with no tooling fee.
NPT 1/4" male standard (matches North American mobile equipment). G1/4B (BSP) available. ORFS (O-ring face seal) adaptors can be supplied separately.
Silicone oil fill remains effective to +150 °C, but the Bourdon tube and socket are rated for media up to +100 °C for brass versions. For hydraulic fluid above +80 °C, specify the 316L SS wetted-parts option.
Silicone oil fill does not contact the process — it fills the case exterior. The wetted parts (bourdon tube, socket) contact the process. Wetted parts are brass (standard) or 316L SS (optional).
Replace if: pointer sticks or moves sluggishly, readings are more than ±5% off a reference gauge, or if silicone oil shows cloudiness (water contamination). Do not attempt to repair — replacement is the correct action.
63 mm, 100 mm, and 160 mm. 100 mm is most common for equipment panels. 63 mm for space-constrained manifold mounting.
Generally not for moderate pulsation — silicone fill provides inherent damping. For extreme hydraulic hammer (relief-valve chatter, rapid valve closure), a piston snubber upstream prolongs gauge life even with liquid fill.
Yes. CE marking covers the Pressure Equipment Directive (PED 2014/68/EU) for gauges in Category I. Third-party test reports available on request.